24-hour national service hotline
Please contact us for further information
contact>>date：2017-08-21 09:11
AS-CF236N ceiling fan remote control kit utilizes infrared control technology.
It consists of a remote control and a rectangular shape receiver.
It is designed for easy installation and operation.
Good for all ceiling fans;
Two load outputs one for controlling the fan and another one for controlling the lights;
Three fan speeds;
ABS-V0 flame resistance material; and
Elegant design and high quality build.
AS-CF236N ceiling fan remote control kit consists of two pieces as shown in Fig. 1.
l An infrared remote control unit with a wall mount bracket; and
l A rectangular shape receiver that can receive control commands from the remote control
unit. This receiver uses existing wiring and can easily fit into the canopy of the ceiling fans.
AS-CF236N remote control unit is battery driven and there is no wiring requirement. The receiver
has its all connection wires clearly labelled as shown in Fig. 3.
ACL: Connected to the hot wire of power supply
ACN: Connected to the neutral wire of power supply
LIGHT: Connected to the lights
FAN: Connected to the fan
COM: Connected to the neutral wire of the fan and/or lights
Warning: Please make sure power is turned off before starting installation!
Once properly wired the AS-CF236N receiver can be installed into the canopy of the ceiling fan
as shown in Fig. 4.
Note: The two infrared detectors should be arranged to face two orthogonal directions.
Fig. 5 shows the front and the back of the remote control unit. Before operating ceiling fan and
lights please complete the following two procedures:
a. The remote control unit uses one 6F22 9V battery. Please open the sliding cover and
install the battery.
b. Turn on the power supply to the ceiling fan and lights. If there is another switch to
control the fan speed and the lights please set the switch to the highest fan speed and
turn on the lights.
Now it is ready to control the ceiling fan and lights using the remote control unit.
1. Turn on fan: The remote control unit has three buttons LOW MED and HI. Pressing each
of these three buttons will turn on the fan and set the fan to low speed medium speed and high
speed respectively.
2. Turn off fan: Pressing the FAN/OFF button will turn off the fan.
3. Turn on or turn off light: Pressing the LIGHT ON/OFF button will turn on or turn off the
lights. When the light is on the displayed light indicator is on.