Asia Bright/ A-BRT| Home Appliances PCBA| Smart Switches| Smart Home System

BRT-602 Timer Switch with Remote Control

date：2017-08-15 16:17

BRT-602 is a timer switch kit which consists of a wall mount unit and a remote control set. The
user can control the load either directly using the wall mount unit or using the remote. The wall
mount unit is designed for easy installation and retrofit directly fit into standard wall box.

Features
Views
Specification
Installation
Operation
Application
Download

One button operation and hidden keypad panel for timer settings;
Delay off time up to 30 minutes which can be set accurately to a second;
Remote control distance up to 15m;
LCD display showing the current time and the current status of the switch;
Good for all kinds of loads (Resistive inductive and capacitive);
ABS-V0 flame resistance material; and
Classical 86 series design and high quality build.
Fig. 1 and Fig. 2 show the front view and the back view of the wall mount unit of BRT-602 timer

  switch respectively.



  As shown in Fig. 1 the wall mount unit of BRT-602 timer switch has an LCD display and an

  On/Off buttons in the front. The LCD display shows the current time and the current status of the

  switch. The On/Off button is used for turning on or turning off a load.

  When the On/Off button is pressed

            The display shows On and the load will be turned on immediately; and

  When the On/Off button is presses again the display will show Off and

            If there is no delay off time being set the load will be turned off immediately; or

            If there is delay off time being set the load will be turned off only after the preset delay off

            time runs out. Meanwhile the display will show a “bell” sign. Press the On/Off button will

            cancel the delay off operation and turn off the load immediately.

  As shown in Fig. 3 the front plate can be flipped down from the top edge. A 9 keypad panel

  hidden behind the front plate is used for setting up the timer. Please refer to “BRT-602 Timer

  Switch Setup” for details.

  Fig. 4 shows the remote control set. Each of the buttons can be used as an on/off button. Although

  there are 6 buttons on the remote only one button is needed to control one BRT-602 wall mount

  unit. The remote set can be set to control up to six BRT-602 wall mount units. Please refer to

  “BRT-602 Timer Switch Setup” for details.
The wall mount unit of BRT-602 timer switch only requires hot wire for installation:

        Hot wire (ACL):        Coming from the power line with 220V;

        Load wire:                 Going to the load.

  Warning: Please make sure power is turned off before starting installation!

  Fig. 4 shows the wiring diagram and Fig. 5 shows the step-by-step installation instructions. There

  are three easy steps:

              Step one:     Use a screwdriver to pry off the front plate in position A;

              Step two:     Wiring according to the diagram and the labelled ports of the switch; and

              Step three: Install screws and front plate.
1.    Following the wiring diagram and Installation Guide to set up the wall mount unit and power .

  it with 220 voltages.

  2.    Flip down the front plate from the top edge.

  3.    Set up Time and Date: Press the SET button the displayed hours will flash and then press

  – or + to adjust the hours. Press the SET button again the displayed minutes will flash and

  then press – or + to adjust the minutes. Press the SET button again the displayed date will

  flash and then press – or + to adjust the date. Finally press the SET button to finish and the

  settings are saved.

  4.    Set up Delay off Time: The longest delay off time is 30 minutes. Press the Ⅱbutton to set

  the minutes and then press button ◁ or ▷ to adjust the minutes. Press the Ⅱbutton again to

  set the seconds and then press button ◁ and ▷ to adjust the seconds. Finally press and hold

  the Ⅱbutton to save the settings or the settings will be saved automatically if there is no

  keypad operation for 15 seconds.

  Once the settings are finished flip up and close the front plate. The delay off time can be

  deleted following Step 2 above and Step 5 below.

  5.    Delete the Delay off Time setting:   Press theⅡbutton to set the minutes to 00 using – or

         + and press theⅡbutton again to set the seconds to 00 using – or +. The switch will just

         have a basic ON/OFF function.

  At this point the wall mount unit is ready to control the load. In order to control the load remotely

  using a remote set the remote set needs to be synchronized with the wall mount unit.

  6.    Install one 12V 23A battery into the remote set.

  7.    Synchronize the wall mount unit with the remote: Flip down the front plate from the top

         edge. Press and hold “III” button for 2 seconds until the display show     . Then press one

         of the 6 buttons on the remote until      disappears. This button is now set up to control the

         wall mount unit specifically. The synchronization process can last up to 20 seconds.
BRT-602 timer switch kit can be used for automatically turning off all kinds of loads such as fans lights appliances or other kinds of electrical equipment. They are perfect for saving energy and

bringing convenience and safety to our daily life and work. The remote set is especially handy.

The elegant design of BRT-602 timer switch makes it suitable for wide applications at various locations such as homes schools laboratories hospitals offices etc. especially for luxurious

hotels and hi gh-grade villas.
PDF Download：
Click download >>>>

【back list】

Home About Us Product ODM/OEM Application Support News Careers Contact Us

Address：Building10 , Asia Industrial Park Gangtou , Bantian , Shenzhen , China　　Telephone：（+86） 755-89748200
Copyright © 2017 Shenzhen Asia Bright Industry Co.,Ltd. 　　　ICP Registration Number：粤ICP备11018644号