24-hour national service hotline
Please contact us for further information
contact>>date：2017-08-11 16:36
Load power up to 2000W;
8 different delay-off time settings from 2 minutes to one hour adjustable by user using dip switches;
Manual override. Easy to use. A gentle push will turn on or turn off the load;
Good for all kind of loads (an additional adaptor is needed for capacitive loads);
ABS-V0 flame resistance material; and
Classical 86 series design and high quality build.
BRT-415 push button timer switch only requires hot wire for installation:
Hot wire (ACL): Coming from the power line with 220V;
and Load wire: Going to the load.
Fig.3 BRT-415 Wiring Diagram
Warning: Please make sure power is turned off before starting installation!
Fig. 3 shows the wiring diagram and Fig. 4 shows the step-by-step installation instructions. There are three easy steps:
Step one: Use a screwdriver to pry off the front plate in position A;
Step two: Wiring according to the diagram and the labelled ports of the switch; and
Step three: Install the switch to the wall box using screws and put back the front plate.
Fig.4 BRT-415 Installation Guide
Set up delay-off function: There are 4 dip switches on the back of BRT-415 timer switch as shown in Fig. 5. These dip switches are used to set the delay-off time to 8 settings ba
Fig.5 Dip Switches for Setting up Delay-off Time
Fig. 6 shows all the dip switches are in “off” positions. Each combination corresponds to a delay off setting.
0001 delay off time = 2 minutes
1001 delay off time = 5 minutes
0101 delay off time = 10 minutes
1101 delay off time = 20 minutes
0011 delay off time = 30 minutes
1011 delay off time = 40 minutes
0111 delay off time = 50 minutes
1111 delay off time = 60 minutes 0 = off and 1 = on
(Other factory settings are available. Please talk to our sales representatives).
Switch on/off the load: Once the delay-off time is set up pushing the button on the front will turn on the load. The load will be automatically turned off after the delay-off time runs out.
During the delay-off time countdown pushing the button will turn off the load immediately.
BRT-415 push button timer switch can be used for automatically turning on and/or turning off various loads such as fans lights appliances or other kinds of electrical equipment especially for high power loads. They are perfect for saving energy and bringing convenience and safety to our daily life and work.
They have wide applications at various locations such as homes hotels schools laboratories hospitals offices etc.